Youtube

2472 CCF

24' X 72" (6ft.) Center Console, Commercial Flat Bottom Boat

Watch The Video!

2472 CCF VIDEO

Specifications

Hull (standard)

  • Length Overall (LOA):   24′ (not including motor guard)
  • Bottom Width:   70″
  • Beam:   94″ – 96″
  •  Side Height:   24″ or 30″
  • Bottom Thickness:   3/16″
  • Side Thickness:   3/16″
  • Hull Material:   5086 Marine-Grade Aluminum
  • Floor & Deck Material:   1/8″ Aluminum Diamond Plate
  • Transom Height:   20″ – 25″

Structural Design (standard)

Longitudinal Structure (Fore-Aft)

  • Qty: 4   |   3″ x 1-1/8″ x  3/16″ corrugated bottom runners pressed into hull plating
  • Qty: 2   |   3″ x 1-1/8″ x 3/16″ corrugated side runners pressed into side plating
  • Qty: 2   |   3″ x 2″ x 3/16″ aluminum angle rails (inside gunnel)
  • Qty: 2   |   2″ Schedule 40 aluminum half pipe (outside gunnel)

Transverse Structure (Port-Starboard)

  • Collision Bulkhead:   3/16″, sealed, fully welded, pressure tested
  • Floor Supports:   2″ x 2″ square tubing on 16″ centers
  • Secondary Bracing:   1″ x 1″ angle tacked beneath flooring, between each rib section
  • Transom Reinforcement:   (2) 4″ x 1-1/2″ channels across inside of transom with vertical gussets

Floor Plan & Layout (standard)

  • Front Deck:   5′ aluminum tread plate
  • Front Storage:   Flush-mounted hinged hatch with dry storage
  • Console:   Center console with integrated shelf
  • Seating:   Full-width bench seat
  • Seat Storage:   Top-mounted hinged lid with dry storage
  • Splash Well:   Full-width splash well
  • Drainage:   (2) overboard drains—port and starboard

Transom & Motor Protection (standard)

  • Transom Brackets:   Corner gussets, anode mount, transducer mount
  • Motor Guard:   2″ aluminum pipe motor guard
  • Guard Bracing:   1-1/2″ gusset pipes
  • Motor Clearance:   Designed to allow full trim of outboard motor

Lifting, Handling & Mooring (standard)

  • Lifting Eyes/Cleats:   (4) combination lifting eyes and cleats
  • Locations:   Port and starboard — bow and stern
DOWNLOAD DRAWING & SPECS

Standard Features

Steering & Control

  • Steering System:   Single-cable manual steering
  • Steering Wheel:   Included

Lighting & Visibility

  • Navigation Lights:   Front flush-mounted lights
  • All-Around Light:   White 360-degree light

Bilge & Drainage

  • Bilge Pump:   1,100 GPH automatic bilge pump
  • Control:   Manual override switch on dash

Fuel System

  • Fuel Tank:   12-gallon plastic fuel tank
  • Tank Location:   Port side mounted
  • Fuel System:   Fittings, valves, hoses, and fuel-water separator

Electrical & Power

  • Power Outlet:   12V USB socket
  • Battery:   Marine cranking battery
  • Battery Installation:   Battery case and hold-down strap
  • Wiring Protection:   All wiring encased in plastic split loom

Corrosion Protection & Hardware

  • Anode:   Installed on transom
  • Fasteners:   Stainless steel fasteners throughout

Fit, Finish & Protection

  • Dry Storage Seals:   Gaskets on front dry box
  • Edge Protection:   Trim gaskets on all raw edges

Options & Upgrades

Commercial Work Package

Push Knees

  • Type:   Heavy-duty D-rubber
  • Size:   3″
  • Location:   Bow — port and starboard
  • Purpose:   Docking, pushing, and workboat contact protection

Side Rubber Rails

  • Type:   Heavy-duty D-rubber
  • Size:   3″
  • Coverage:   Full outside gunnel — bow to stern
  • Purpose:   Hull protection during docking and commercial use

6" Wide Rails (catwalk)

  • Rail Width:   6″
  • Construction:   2″ x 3/8″ interior flat bar
  • Reinforcement:   Heavy-duty gusset plates to side wall
  • Purpose:   Walkable catwalk providing secure footing for crew movement

Upgrades

Fuel Tank Options

  • Rear Aluminum Fuel Tank:   Replaces standard plastic tank
  • Front Step-Style Fuel Tank:   Aluminum tank located behind front deck

Flotation & Safety

  • Saddle Flotation Pods:   Improves flotation and stern lift; eliminates motor guard
  • Level Flotation:   Internal foam flotation installed from bow to stern

Windshield

  • Low-Profile Windshield:   1/4″ Plexiglass with integrated 1″ Schedule 40 aluminum grab rail

Steering

  • Hydraulic Steering System:   Recommended for 90-115 HP

Lighting

  • Bow-Mounted LED Light Bar:   10″ LED light bar mounted in an integrated bow light pocket

Electrical

  • 4-Gang Switch Panel:   Blue Sea Systems with Perko on/off switch
  • 6-Gang Switch Panel:   Blue Sea Systems with Perko on/off switch

Communications

  • VHF Radio Package:   Standard Horizon VHF with 3′ antenna

Sound System

  • System options to be discussed with your sales rep

Electronics (GPS / Sonar)

  • GPS / Sonar Combo:   Garmin 5″, 6″, or 7″ display
  • Transducer:   External transducer
  • Console Integration:   Flush-mounted GPS in console

Horn

  • Console-Mounted Horn:   Flush-mounted into the console

Seating & Comfort

  • Driver Seat:   Folding seat with removable pedestal
  • Passenger Seat:   Folding seat with removable pedestal
  • Bench Seat Cushion:   2″ foam with marine vinyl cover (medium gray)

Paint

  • Color options to be discussed with the sales rep

Decking

  • EVA Foam Decking
  • Spray Liner

Power Package

Outboard Motor Packages Available

  • Brands:   Honda  /  Mercury  /  Suzuki
  • Horsepower:   75 HP  /  80 HP  /  90 HP  /  100 HP  /  115 HP

Trailer

Galvanized Trailer Package

  • Manufacturer / Model:   McClain 1920-14 SR
  • Type:   Single-axle galvanized
  • Capacity:   3,000 lbs.
  • Tires:   14′
  • Side Guides:   Heavy-duty
  • Bunks:   (4) plastic-covered drive-on boards
  • Lighting:   LED
  • Spare:   Spare tire with carrier
  • Setup:   Adjusted and fitted for selected boat

2472 CCF Gallery
ORDER NOW